The ScaleBlaster SB-150 is an electronic water descaler model designed for indoor or outdoor installations in hard to very hard water areas. Ideal for all large houses.
- 1 A output
- Digital electronics
- Works on 115 or 230 VAC.
- Maximum pipe size: 1 1/4"
- Pipe type - Copper, PVC, PEX
- Water hardness range - 1-14 gpg (1-239 ppm)
- Pipe Size Capacity: up to 1 1/4" pipe size diameter. Designed for residential use only.
- Pipe Type: PVC, copper or any non-ferrous based pipe.
- Input Voltage: 115/230 VAC.
- Input Power: 6 Watts
- Output Voltage: 5 V (open circuit)
- Output Current: 1 A
- Input Fuse: 250 mA, 250 VAC, 5x20mm, fast acting (Radio Shack part # 270-1046)
- Output Fuse: none required, internal current limited.
- Descaling Method: The control box supplies a square wave signal to a coil of wire that is wrapped around the pipe. The signal is changed anywhere from 2,000 to 24,000 times a second, producing a modulating frequency waveform that hits the resonant frequency of the calcium carbonate molecules causing them to lose it's adhesiveness.
- Enclosure: made out of high-impact ABS molded plastic, NEMA 4X rated, UL approved. Mounting brackets included. Weatherproof enclosure.
- Signal Cable: 18 gauge, single stranded wire, 40 feet long.
- Warranty: 10 years parts and labor.
- Shipping Weight: 3.5 lb.
- Carton Dimensions: 12" x 11" x 6"
For more information, please see the ScaleBlaster FAQs.
